The MH Duo Series is a dual-plate pneumatic heat transfer press. A motor-driven rack-and-pinion system shuttles the two plates left and right; while one plate is under the press head, the operator prepares the other. The machine runs continuously through the shift with no idle time. Applications include piece transfer printing on t-shirts, jerseys, polos, hoodies, sweatshirts, cushion covers, tote bags and fabric accessories. It supports sublimation, stone print, flock, foil, vinyl, screen printing and offset transfer. Piece digital paper transfers to fabric, sewn garments, and hard surfaces such as wood, glass and metal. The machine suits boutique textile workshops, jersey producers, school and sports-club contractors, and promotional-product studios running several hundred pieces per day.
The MT Glide Series is a dual-plate shuttle pneumatic heat transfer press. A timing-belt drive moves two plates forward and back between the operator zone and the press head; while one plate is under the press, the operator prepares the other. The single 100×150 cm large-format plate sits well above the standard t-shirt print area — the machine is built for large-format piece production. The press suits industrial workshops producing large-format textile, home-textile panels, promotional fabric, and trade-show and advertising materials. It supports sublimation, stone print, flock, foil, vinyl, screen printing and offset. Piece digital paper transfers to fabric or hard surfaces (wood, glass, metal). Three independent digital thermostats maintain a stable temperature profile across the large plate. The separated operator zone keeps hands away from the hot surface; long-shift injury risk drops.
The MD Series is a large-format dual-plate pneumatic heat transfer press built for wide-area piece production. A timing-belt drive shuttles two plates left and right; while one plate is under the press, the operator prepares the other. Four plate sizes from 80×110 cm to 150×250 cm cover production well beyond the standard t-shirt format — quilt panels, tablecloths, banners, trade-show fabric and automotive upholstery run in a single press cycle. It supports sublimation, stone print, flock, foil, vinyl, screen printing and offset transfer. Piece digital paper transfers to fabric, sewn garments or hard surfaces (wood, glass, metal). Pneumatic pressure is set digitally from the control panel; every press cycle applies the same force. The press suits home-textile export factories, large-format trade-show and signage producers, automotive upholstery workshops, and industrial contractors running large-format piece printing.
The MP Series is a dual-plate pneumatic heat press built for piece-level fabric embossing and 3D puff printing. While one plate is under the press head, the operator prepares the other — the workflow stays continuous even in small-series fashion production. With an engraved embossing plate, the press leaves a permanent three-dimensional texture on fabric (piece-to-piece fabric embossing). Special puff film and flex materials expand under heat and pressure, giving garments a raised 3D effect. Swap to a flat plate and the same machine runs sublimation, stone print, flock, foil, vinyl, screen printing and offset transfer on t-shirts, jerseys and bags. The press suits premium streetwear and fashion labels, boutique textile ateliers, cap manufacturers, luxury-accessory in-house studios and limited-edition collection producers.
