Skip to main content

Fabric Embossing & 3D Puff

Dual-Plate Fabric Embossing & 3D Puff Heat Press

The MP Series is a dual-plate pneumatic heat press built for piece-level fabric embossing and 3D puff printing. While one plate is under the press head, the operator prepares the other — the workflow stays continuous even in small-series fashion production. With an engraved embossing plate, the press leaves a permanent three-dimensional texture on fabric (piece-to-piece fabric embossing). Special puff film and flex materials expand under heat and pressure, giving garments a raised 3D effect. Swap to a flat plate and the same machine runs sublimation, stone print, flock, foil, vinyl, screen printing and offset transfer on t-shirts, jerseys and bags. The press suits premium streetwear and fashion labels, boutique textile ateliers, cap manufacturers, luxury-accessory in-house studios and limited-edition collection producers.

MP-3030
30×30
cm
11.8″ × 11.8″
Plate dimensions
MP-4040
40×40
cm
15.7″ × 15.7″
Plate dimensions
MP-100150
100×150
cm
39.4″ × 59.1″
Plate dimensions

Ready to configure your line?

Send your production width, substrate and target throughput — we reply within one business day with a tailored quote, drawings and delivery timeline.

Applications and Industries

The MP Series combines piece-level fabric embossing and 3D puff printing on a single machine; with a flat plate fitted, the same machine also runs classic piece transfer printing. • Piece fabric embossing: three-dimensional embossed patterns on piece fabric via an engraved embossing plate; branded textiles, decorative fabric panels, premium accessory surfaces • 3D puff (puff film): t-shirt 3D brand logo, hoodie front-chest 3D design, sweatshirt collection graphic, sports jersey 3D number / name • Caps and accessories: snapback front-panel 3D logo, baseball-cap brand emboss, beanie front design, fabric brand label • Bags and premium accessories: tote-bag brand logo, backpack front-pocket design, fabric-bag brand identity • Limited-edition collections: boutique fashion collection design, designer t-shirt limited edition, streetwear collection graphic • Combination printing: foil (varak) printing with a 3D puff layer on top; metallic and holographic + 3D puff effects • Classic piece transfer (flat plate): sublimation, stone print, flock, foil, vinyl, screen print, offset — piece digital paper to fabric or hard surface (wood, glass, metal) Three plate sizes (30×30, 40×40, 100×150 cm) fit different production scales. Small size for boutique fashion and caps; large size for decorative fabric panels and larger textile products.

Dual-Function Capacity: Fabric Embossing and 3D Puff

The MP is a specialty dual-plate press engineered for two distinct transfer modes on the same chassis — fabric embossing and 3D Puff. Embossing drives pattern plates into the fabric surface to leave a tactile relief. 3D Puff bonds raised, high-density transfer film onto apparel and accessories — the raised letter decals on sportswear jerseys, the applique panels on sneaker uppers, the logo patches on technical bags, the tactile graphics on premium streetwear. Swap the pattern plate on the upper tool, change the cycle recipe, and the same press moves between both modes. Three plate sizes cover prototyping through factory output. MP-3030 runs a 30×30 cm plate for studio sampling, small-label R&D and short-run sneaker decals. MP-4040 runs a 40×40 cm plate — the production workhorse for small-to-mid-batch sportswear logos and streetwear panels. MP-100150 runs a 100×150 cm plate, engineered to order for industrial puff and panel-embossing workshops serving bag makers and large-format apparel producers. The 100×150 size is built to specification; published electrical data is issued on quote. Electrical supply differs by size. MP-3030 draws 1 kW on a single-phase 220–240 VAC line, 4.5 A, 3 × 1.5 mm² cable — a standard workshop outlet is enough. MP-4040 is three-phase: 10 kW total, 26.5 A, 4 × 2.5 kW resistance bank, 380–415 VAC, 5 × 2.5 mm² cable. Plan a three-phase drop before MP-4040 arrives. Both models run electric heating to 230 °C with digital thermostat and auto-control circuit; heat-up takes 20–30 minutes and cool-down 60–120 minutes. MP-4040 plates out at 820 × 1620 × 1830 mm installed — 362 kg net, packed 1748 × 948 × 2064 mm. The MP-3030 footprint is bench-top. Target buyers: sportswear labels, sneaker brands, premium apparel houses and bag makers that need a dedicated 3D puff workflow on industrial tooling rather than a repurposed flat press.

Integrated Safety Systems

The electrical and mechanical design of the MP Series includes 10 independent layers of protection. Operator safety • Two-hand safety command — the upper plate closes only when both of the operator's hands are on the command buttons • Separated operator zone — while one plate is pressing, the operator works on the other • Emergency stop button • Audible alarm and visual indicator Electrical protection • Phase protection • Fuse protection • Earth-leakage protection • Contactor protection system Thermal protection • Automatic overheat cut-off at 240 °C • Heating-circuit protection For warranty, installation and service details, contact our team.

Design Decisions Behind the MP Series

Dual-plate continuous workflow. While one plate is pressing, the operator prepares the other. Even in small-series boutique production, there is no wait time; hourly output runs above single-plate presses. Embossing plate + flat plate option. An engraved embossing plate produces three-dimensional emboss patterns on piece fabric; swap to a flat plate and the same machine runs sublimation, foil, vinyl, screen print and other classic transfer techniques. One machine serves multiple production types. Adjustable pneumatic pressure. Pressure is set from the digital panel by material type; low pressure for thin puff material, high pressure for thick fabric embossing — easy to choose. Low-temperature precision. Puff and emboss materials work in a critical temperature window. The digital thermostat delivers precise control in this range; the material neither deforms at high temperature nor fails to rise at low temperature. Digital thermostat + digital timer. Temperature and press time are entered separately; after a recipe is set, the machine repeats the same cycle on every press — consistency holds shift to shift. Two-hand safety command. The press will not close unless the operator has both hands on the command buttons; finger entrapment is mechanically prevented. Interchangeable plates. Plates detach; custom plate and template sets for unique product shapes (tote bag, hat panel, shoe tongue) can be fitted. Foil + 3D puff combination. A 3D puff layer can be applied on top of a foil (varak) print; a raised effect forms on a metallic or holographic surface. 220V voltage option. The 30×30 cm model already runs on single-phase 220V. For the 40×40 cm and 100×150 cm models, a 220V configuration can be specified at order for countries with 220V infrastructure. Internationally readable model code. The MP-3030 / MP-4040 / MP-100150 format directly states plate width and height — a foreign buyer grasps it instantly in the technical catalogue.