Skip to main content

Shuttle · Piece Transfer Printing

Mearic MT Glide — Dual-Plate Shuttle Pneumatic Heat Press

The MT Glide Series is a dual-plate shuttle pneumatic heat transfer press. A timing-belt drive moves two plates forward and back between the operator zone and the press head; while one plate is under the press, the operator prepares the other. The single 100×150 cm large-format plate sits well above the standard t-shirt print area — the machine is built for large-format piece production. The press suits industrial workshops producing large-format textile, home-textile panels, promotional fabric, and trade-show and advertising materials. It supports sublimation, stone print, flock, foil, vinyl, screen printing and offset. Piece digital paper transfers to fabric or hard surfaces (wood, glass, metal). Three independent digital thermostats maintain a stable temperature profile across the large plate. The separated operator zone keeps hands away from the hot surface; long-shift injury risk drops.

MT-100150
100×150
cm
39.4″ × 59.1″
Plate dimensions

Ready to configure your line?

Send your production width, substrate and target throughput — we reply within one business day with a tailored quote, drawings and delivery timeline.

Applications and Industries

The MT Glide is designed for large-format piece transfer printing in industrial workshops. The 100×150 cm plate covers wide surfaces in a single press: • Home-textile panels: cushion covers, tablecloths, towels, sheet panel printing • Large-format promotional: trade-show fabric, advertising banner, corporate flags, conference and event textile • Automotive and furniture upholstery: seat panels, interior trim, decorative cushion fabric • Technical textile: large-format work apparel printing, uniform panels • Fashion panels: abaya panels, scarves, pareos, fashion accessories • Hard surface: wood plaques, MDF panels, glass, metal surfaces — large-format transfer • Transfer techniques: sublimation, stone print, flock, foil, vinyl, screen print, offset The press suits export factories running large-format piece printing, advertising / trade-show material producers, and home-textile workshops. For small, fast t-shirt printing, the MH Duo may be a better fit.

Shuttle Production Capacity — 100×150 cm

MT Glide is a dual-plate shuttle heat press. One 100×150 cm shuttle sits on rail bearings under the heated upper plate while the second shuttle travels out to the operator. The operator lays fabric and transfer paper on the exposed shuttle; when the press cycle ends, the shuttles swap positions and the next cycle begins immediately. The 100×150 cm plate is the MT's reason to exist. It is the large-piece niche between the MH — sized for jerseys and cut garments — and the MD digital matrix used for wide-format industrial graphics. A single press cycle covers a full scarf, a shawl, a panel-printed cushion face, the top panel of a sports jersey, a home-textile mid-format piece, or a sectional banner segment — without repositioning, re-registering, or multi-hit overlap. The press runs on 3-phase 380–415 VAC + N + PE at 26 kW total (39.5 A draw), fed from a 4 × 10 + 6 mm² main cable. A 6 × 4 = 24 kW resistance bank delivers the heat load at 36.5 A. Three-phase supply is required — MT is not offered in a single-phase build. Maximum plate temperature is 230 °C, managed through PID control with digital thermostat and thermocouple feedback. Warm-up from cold reaches the working range in 30–40 minutes; end-of-shift cooldown runs 60–120 minutes with auto-shutoff when the plate drops below the safe threshold. An auto-control circuit sequences the shuttle cycle, pressure hold and release without manual timing. Installation footprint and shipping dimensions are confirmed at order — the dual-shuttle layout extends the working envelope well beyond the plate itself, and the rail path must be clear on both sides of the chassis.

Integrated Safety Systems

The industrial design of the MT Glide includes 12 independent layers of protection. The shuttle dual-plate architecture physically separates the operator from the hot surface, which meaningfully lowers long-shift injury risk. Operator safety • Two-hand safety command — the upper plate closes only with both-hand command • Separated operator zone — the operator does not touch the hot surface; the plate shuttles into the press zone while the operator stays in the prep zone • Emergency stop button • Audible alarm and visual indicator Electrical protection • Phase protection • Fuse protection • Earth-leakage protection • Contactor protection system Thermal protection • Automatic overheat cut-off at 240 °C • Heating-circuit protection Pneumatic system safety • Pneumatic safety valve — automatic release on abnormal pressure Sensor reliability • Three-zone thermocouple monitoring — three independent sensors track temperature along the large plate simultaneously For warranty, installation and service details, contact our team.

Design Decisions Behind the MT Glide

Dual-plate shuttle architecture. A timing-belt motor system shuttles two plates forward and back between the operator zone and the press zone. While one plate is pressing, the operator prepares the other — the steps parallelise and hourly output rises. Timing-belt for quiet, precise motion. Belt-driven shuttle is highly repeatable; noise is lower, the plate stops at the same position every time, and large-format alignment stays consistent. Efficient pneumatic system. Low air consumption — even with the large-format plate, a small compressor is enough. Adjustable pneumatic pressure. Pressure is set from the digital panel based on fabric type and transfer technique; every press applies the same force, operator strength does not affect the result. Separated operator zone. The operator never reaches into the hot surface; fabric prep happens in a separate zone. Long-shift injury risk drops. Large-format single plate (100×150 cm). Cushion covers, tablecloths, banners and decorative panels finish in a single press — no panel joining or re-press required. Interchangeable plates. Plates detach; alternative plate sets for different sizes and product types can be fitted. Three-zone digital thermostat. The three independent thermostats hold temperature evenly across the large plate surface; each zone holds its own setpoint, so colour drift drops on large-format prints. Digital timer + digital counter. Press time is entered precisely; the digital counter tracks completed-piece count through the shift. Standard working height. The press sits at ergonomic working height; the operator stays comfortable through long shifts. 220V voltage option. In addition to the standard configuration, the machine can be delivered in a 220V build for countries with 220V infrastructure. Specified at order. Internationally readable model code. The MT-100150 format directly states plate width and height — a foreign buyer grasps it instantly in the technical catalogue.