Skip to main content

Large-Format Piece Printing

Large-Format Dual-Plate Pneumatic Heat Press

The MD Series is a large-format dual-plate pneumatic heat transfer press built for wide-area piece production. A timing-belt drive shuttles two plates left and right; while one plate is under the press, the operator prepares the other. Four plate sizes from 80×110 cm to 150×250 cm cover production well beyond the standard t-shirt format — quilt panels, tablecloths, banners, trade-show fabric and automotive upholstery run in a single press cycle. It supports sublimation, stone print, flock, foil, vinyl, screen printing and offset transfer. Piece digital paper transfers to fabric, sewn garments or hard surfaces (wood, glass, metal). Pneumatic pressure is set digitally from the control panel; every press cycle applies the same force. The press suits home-textile export factories, large-format trade-show and signage producers, automotive upholstery workshops, and industrial contractors running large-format piece printing.

MD-80110
80×110
cm
31.5″ × 43.3″
Plate dimensions
MD-100150
100×150
cm
39.4″ × 59.1″
Plate dimensions
MD-150200
150×200
cm
59.1″ × 78.7″
Plate dimensions
MD-150250
150×250
cm
59.1″ × 98.4″
Plate dimensions

Ready to configure your line?

Send your production width, substrate and target throughput — we reply within one business day with a tailored quote, drawings and delivery timeline.

Applications and Industries

The MD Series is built for large-format piece transfer printing well beyond the classic t-shirt size. Four plate sizes (80×110, 100×150, 150×200, 150×250 cm) cover a wide product range: • Home textile: sheet and duvet panels, tablecloths, cushion covers, towels, curtain panels • Large-format promotional: trade-show stand fabric, advertising banner, corporate flags, conference and event textile • Automotive upholstery: seat panels, interior trim fabric, door-panel surfaces, boat / yacht textile printing • Furniture upholstery: sofa fabric, decorative cushion covers, chair and mattress fabric • Large-format jerseys: full-area jersey printing, goalkeeper kits, club and university jersey panels • Technical textile: large-format work apparel transfer, uniform panels, military and police apparel logos • Hard surface: wood plaques, MDF panels, glass, metal — large-format transfer • Transfer techniques: sublimation, stone print, flock, foil, vinyl, screen print, offset The press suits home-textile export factories, automotive upholstery workshops, home-textile producers, and advertising / trade-show material producers. For roll-fabric production, the MC / MM / MB / MR Series is a better match.

Large-Format Capacity — 80×110 to 150×250 cm, Four-Size Matrix

The MD is the largest piece press in the Mearic lineup. Four plate sizes cover a span that most industrial heat presses do not reach on a single platform: 80×110 cm at the entry, 100×150 cm and 150×200 cm in the mid tier, and 150×250 cm as the ceiling. The MD-80110 (80×110 cm) is sized for large banner segments, automotive headliner pieces, sectional soft-signage panels and oversized sportswear front graphics — 16 kW total, 26 A, 3 × 5 kW resistance, 5 × 6 mm² cable. The MD-100150 (100×150 cm) lands in the automotive-interior and home-textile panel zone — door skins, seat back panels, decorative wall panels, full-size curtain sections — at 28 kW total, 42.5 A, 3 × 9 kW resistance, same 5 × 6 mm² feed. The MD-150200 (150×200 cm) scales to full exhibition fabric, two-metre hospitality panels and full-bed home-textile transfers at 55 kW total, 83.5 A, 3 × 18 kW resistance over a 4 × 16 + 10 mm² cable. The MD-150250 (150×250 cm) is the industrial ceiling — full trade-show backdrops, full-width automotive interior panels, wall-size decorative transfers — at 61 kW total, 93 A, 3 × 20 kW resistance on a 4 × 25 + 16 mm² cable. All four run 3-phase 380–415 VAC on an auto-control circuit with digital recipe memory and weekly schedule — set parameters once per product, then recall by name across operator changes and shifts. Pneumatic pressure delivers uniform plate contact across the full area; max temperature is 230 °C with 240 °C over-temp cut-off. 80×110 and 100×150 warm up in 20–30 minutes; 150×200 and 150×250 in 30–40. MD is a large machine — specify the model, power feed and floor clearance at quote stage so we can plan the install footprint for your factory.

Integrated Safety Systems

The industrial design of the MD Series includes 12 independent layers of protection. The large-format dual-plate architecture layers operator safety in step with the size of the plate. Operator safety • Two-hand safety command — the upper plate closes only when both of the operator's hands are on the command buttons • Separated operator zone — while one plate is pressing, the operator works on the other • Emergency stop button • Audible alarm and visual indicator Electrical protection • Phase protection • Fuse protection • Earth-leakage protection • Contactor protection system Thermal protection • Automatic overheat cut-off at 240 °C • Heating-circuit protection Pneumatic system safety • Pneumatic safety valve — automatic release on abnormal pressure Sensor reliability • Three-zone thermocouple monitoring — three independent sensors track temperature along the large plate simultaneously For warranty, installation and service details, contact our team.

Design Decisions Behind the MD Series

Dual-plate shuttle architecture. A timing-belt motor system shuttles two plates left and right. While one plate is pressing, the operator prepares the other — the steps parallelise and hourly output stays high even at large format. Four large-format plate sizes. Runs from 80×110 cm for mid-volume piece printing up to 150×250 cm for premium XL format, across four sizes. Pick the format that fits your product portfolio (quilt panels, tablecloths, banners, automotive panels) — no need to stitch together products that do not fit a single plate. Three-zone digital thermostat. Edge-to-centre temperature consistency is critical on large plates. On the MD, three independent thermostats track the temperature map across the plate surface; each zone holds its own setpoint, so edge-to-centre colour consistency holds even at 150×250 cm. Efficient pneumatic system. Tight design means less compressed air is consumed even at large format; compressor investment and operating cost drop. Digital pressure adjustment. Pneumatic pressure is entered from the digital panel based on fabric type, transfer material and product layer; no re-calibration is needed between jobs and print-to-print consistency holds. Two-hand safety command. Because the large plate is heavier, finger-entrapment risk is higher than on a standard textile press. Requiring both hands on the command buttons removes that risk mechanically. Digital timer + digital counter. Press time is entered precisely; the digital counter tracks completed-piece count and production pace through the shift. Interchangeable plates. Plates detach; alternative plate sets for different sizes and product types can be fitted. Standard working height. Despite the large plate, the press sits at ergonomic working height; the operator stays comfortable through long shifts. 220V voltage option. In addition to the standard configuration, the machine can be delivered in a 220V build for countries with 220V infrastructure. Specified at order. Internationally readable model code. The MD-80110 / MD-100150 / MD-150200 / MD-150250 format directly states plate width and height — a foreign buyer grasps it instantly in the technical catalogue.