Skip to main content

Piece Transfer Printing

Mearic MH Duo — Dual-Plate Pneumatic Heat Press

The MH Duo Series is a dual-plate pneumatic heat transfer press. A motor-driven rack-and-pinion system shuttles the two plates left and right; while one plate is under the press head, the operator prepares the other. The machine runs continuously through the shift with no idle time. Applications include piece transfer printing on t-shirts, jerseys, polos, hoodies, sweatshirts, cushion covers, tote bags and fabric accessories. It supports sublimation, stone print, flock, foil, vinyl, screen printing and offset transfer. Piece digital paper transfers to fabric, sewn garments, and hard surfaces such as wood, glass and metal. The machine suits boutique textile workshops, jersey producers, school and sports-club contractors, and promotional-product studios running several hundred pieces per day.

MH-4050
40×50
cm
15.7″ × 19.7″
Plate dimensions
MH-5070
50×70
cm
19.7″ × 27.6″
Plate dimensions

Ready to configure your line?

Send your production width, substrate and target throughput — we reply within one business day with a tailored quote, drawings and delivery timeline.

Applications and Industries

The MH Duo runs piece transfer printing on textile and hard surfaces. The dual-plate architecture suits continuous production flow: • Textile: t-shirts, polos, jerseys, hoodies, tracksuits, team uniforms • Fabric accessories: cushion faces, tote bags, aprons, bandanas, kitchen towels • Fashion: scarves, pareos, abaya panels • Promotional: fabric flags, hat panels, product labels • Hard surface: wood plaques, MDF panels, metal plates, ceramic tiles • Transfer techniques: sublimation, stone print, flock, foil, vinyl, screen print, offset The press suits boutique textile workshops, jersey producers, school and sports-club contractors, and promotional-product studios running several hundred pieces per day. For industrial roll-fabric production, the MC / MM / MB Series is a better match.

Plate Capacity and Cycle Throughput

The MH is a dual-plate pneumatic heat press built for garment-size piece transfer. One plate presses while the operator unloads and reloads the second — cycle time is driven by dwell and cooling, not by the press coming free. Two plate sizes cover the mainstream garment range. MH-4050 carries a 40×50 cm plate: a direct fit for standard T-shirt fronts, polo panels and sportswear name-and-number work on jersey backs. MH-5070 steps up to a 50×70 cm plate — headroom for oversized graphic tees, full-back team prints, hoodie panels and larger decal transfers that do not fit a 40×50 bed. Both SKUs run on a single-phase 220–240 VAC supply at 50/60 Hz through a 3×2.5 mm² cable — no three-phase line required. MH-4050 draws 3 kW total (15 A, 2.5 kW resistance); MH-5070 draws 5 kW (22 A, 4.5 kW resistance). Electric heating reaches 230 °C, held by a digital thermostat reading a thermocouple sensor, with AC-inverter control on the auto-control circuit. Heating time is 20–30 minutes; cooling time 60–120 minutes. A pneumatic actuator closes the plate at consistent pressure every cycle — unlike manual clamshell presses, pressure does not drift as the shift wears on, and the operator does not fatigue. Installation is compact: MH-4050 ships at 1060×1300×1750 mm (242 kg net, 337 kg gross); MH-5070 at 1500×1260×1750 mm (378 kg net, 498 kg gross). Both fit inside a POD workshop, a team-jersey printing room or a promotional-merch studio without three-phase rewiring, and both are rated for continuous shift production.

Integrated Safety Systems

The electrical and mechanical design of the MH Duo includes 11 independent layers of protection. On a clamshell-type heat press, finger entrapment is the critical risk; the machine runs with a command system that physically prevents it. Operator safety • Two-hand safety command — the upper plate closes only when both of the operator's hands are on the command buttons. The operator cannot be under the plate at that moment; finger entrapment is mechanically prevented. • Emergency stop button • Audible alarm and visual indicator Electrical protection • Phase protection • Fuse protection • Earth-leakage protection • Contactor protection system Thermal protection • Automatic overheat cut-off at 240 °C • Heating-circuit protection Pneumatic system safety • Pneumatic safety valve — automatic release on abnormal pressure Sensor reliability • Thermocouple backup — backup engages if main temperature sensor fails For warranty, installation and service details, contact our team.

Design Decisions Behind the MH Duo

Dual-plate continuous workflow. While one plate is pressing, the operator prepares the other. On single-plate presses, the machine waits until the operator places the next piece; on the MH Duo there is no wait — continuous production runs through the shift. Motor-driven rack-and-pinion motion. The two plates shuttle left and right under motor drive. The plates stop at the same position every time; print-to-print alignment stays consistent. Efficient pneumatic system. Tight design means less compressed air is consumed; a small compressor is enough. Operating cost and compressor investment both drop. Adjustable pneumatic pressure. Pressure is set from the digital panel based on fabric type and transfer technique; no re-calibration is needed between jobs. Manual and automatic operating modes. Manual mode for small series or specialty products; automatic mode for high-volume serial production — the same machine adapts to two different production paces. Two-hand safety command. The operator must have both hands on the command buttons while the press closes. Hands cannot be under the plate; finger entrapment is mechanically prevented. Two plate sizes. 40×50 cm (classic t-shirt size) and 50×70 cm (larger print area) — choose based on product portfolio. Interchangeable plate options. Plates detach easily; alternative plate sets for different sizes and product types (hat panels, specialty shapes) can be fitted. One machine serves multiple product types. Digital thermostat + digital timer + digital counter. Temperature and press time are entered separately; the digital counter tracks completed-piece count through the shift. Standard working height + detachable feet. The press sits at standard working height; the feet can be removed so it can be used on a workbench or table. 220V voltage option. In addition to the standard configuration, the machine can be delivered in a 220V build for countries with 220V infrastructure. Specified at order. Internationally readable model code. The MH-4050 / MH-5070 format directly states plate width and height — a foreign buyer grasps it instantly in the technical catalogue.

Related Mearic series